Most Commented Posts
The Hyperx cloud is among the top of the line and also the most affordable commercial headphones. For users of the Hyperx cloud 2, this guide to download hyperx cloud 2 drivers windows 10 shall help you understand how to install the hyperx cloud firmware both manually and automatically.
Download hyperx cloud 2 drivers For windows 10
We highly recommend gamers who get the HyperX headset to download the hyperx cloud firmware before using the headset for the first time since users face issues otherwise. The answer is to install the hyperx driver for it.
Download the hyperx driver from the Hyperx website or click on the link to download the software:
Download the firmware and the pdf instruction file.
Run the software according to the instructions and install the firmware.
If you do not connect Hyperx Cloud to your PC before installing the hyperx driver, you will get an error message saying “Hyperx Cloud device not found”.
Users still face a lot of problems with Hyperx cloud 2 drivers windows 10. Let us look at the methods available to fix this.
Method 1: Is your headphone unmuted?
Many users faced issues with the headset; they were unable to adjust the volume of it. There is a simple solution to this. You will just have to find the USB dongle that comes with the headset. Locate the Mute button on it if you are facing issues and then click it to unmute it. This might help to resolve the issue.
The dongle of the USB possess their own microphone keys where the volume can be adjusted, muted and unmuted. The next step involves verifying if the headset is properly connected to the dongle, which takes us to method 2.
Method 2: Check if connecting to a different USB port works
Since the Hyperx connects via USB, it is susceptible to a variety of USB-related issues. Although the USB 3.0 standard is commonly used nowadays, plenty of tech geeks have stated that this headset does not work with USB 3.0. Try connecting your headset to a USB 2.0 port instead of USB 3.0 to see if that fixes the problem.
Method 3: Device’s audio settings
If you’re still having issues with your HyperX Cloud II device, you may be able to resolve them by changing your audio device settings. However, you must first ensure that your headset is correctly connected to the system before proceeding. Then you must take the following steps:
- Enter sound by pressing Windows Key + S. Select Sound from the drop-down menu.
- Go to the Recording tab and right-click on the blank space there. Show Disabled Devices is the first option, followed by Show Disconnected Devices.
- Now locate the microphone, right-click it, and select Enable from the drop-down menu.
- Then, to save the changes, click Apply and then click on OK and exit.
To resolve the issue, some users have suggested disconnecting and reactivating the microphone. To do so, open the Sound window and go to the Recording tab. Right-click on your microphone and select Disable from the front menu. Then simply re-enable your microphone to see if this resolves the issue.
These were the simple steps to install hyperx cloud 2 drivers windows 10. We have also added 3 different methods to fix the hyperx cloud 2 drivers windows 10 issue as well. I hope you found this article helpful. If you still have any questions, you can mention them in the comments down below.